| Step | | Procedure & Parts & Tools |
| 1 |
|
PUSH IN ON THE 2 ORANGE TABS TO REMOVE THE BASE COVER.
|
| 2 |
|
REMOVE THE BASE COVER.
|
| 3 |
|
LOOSEN THE BRUSH HEIGHT KNOB AND REMOVE IT. SET IT ASIDE.
|
| 4 |
|
FLIP THE BASE OVER AND REMOVE THE 5 SCREWS.
| Screwdriver-phillips |
|
|
| 5 |
|
FLIP THE BASE BACK OVER AND REMOVE THE BRUSH MOTOR COVER.
|
| 6 |
|
PLACE THE VOLT METER LEADS ON THE 2 BLUE WIRES ON THE CONTROL BOARD. PLUG THE MACHINE IN AND TURN IT ON. THE VOLT METER SHOULD READ 120 VOLTS.
| Volt meter (True RMS capable) |
&Width=100)
|
|
| 7 |
|
REVERSE STEPS 1 THRU 5 TO REASSEMBLE THE MACHINE.
|